Technika LCD22-228 Manuel d'utilisateur télécharger pdf (Page 7)

ATTACHING/DETACHING THE STAND

ﬁ g 1

ﬁ g 2

For optimum viewing, if wall mounting the TV

higher than eye level, the TV should be tilted

downwards so that the TV’s screen is ‘face on’.

See ﬁ g 1 and 2

Attaching the Stand

1) Insert the TV into the stand at 45 degrees 2) Twist the TV into the CLOSE

position until it clicks into place

This television requires a VESA 100 wall mount, or equivalent.

Detaching the Stand

1) To remove the base, press close and rotate 45 degrees.

2) Remove the 4 screws highlighted

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling

where there could be any electric wires, water or gas pipes.

Wall mounting the TV

1) Remove the four screws highlighted below.

2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes

are indicated in the picture below.

Important – If wall mounting this TV, only

use the screws already provided in the wall

mounting holes. Using other screws which

are longer could cause irreparable damage to

internal parts.

Viewing angle

Attaching / detaching the stand and wall mounting

3) Remove the screw/s in the neck of

the stand (where ﬁ tted)

Technika Manual19-22-228.indd Sec1:9Technika Manual19-22-228.indd Sec1:9 6/24/2010 11:41:51 AM6/24/2010 11:41:51 AM

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Pas de commentaire

Technika LCD22-228 Manuel d'utilisateur Page 7